Products

Fabri-Valve F10 Swing Check Valve

Fabri-Valve F10 Swing Check Valve

Product Description

The Fabri-Valve F10 is a swing check valve that can be installed in any orientation. Snubbers (dash pots) are available to control the rate of closing in unusual orientations. When ordered with counterweights, the counterweight hub will normally be furnished unkeyed. If orientation of the valve is specified on the order, the hub will be keyed at the factory. Fabricated construction allows a choice of standard and special materials.

Download Literature


Specifications

Size Range
3” – 48”
Pressure Rating
150 psi (10.3 bar) CWP to 24”
50 psi (3.5 bar) CWP 30” – 48”
Temperature Rating
500°F (260°C), Consult factory for applications to 1500°F( 816°C)
NOTE: Service temperatures above 400°F (204°C) require high temperature fasteners. Specify service temperature on paperwork.
Flanges Drilling
ANSI 125/150 through hole is standard.
Contact factory for alternate flange drilling.

Fabri-Valve F10 Swing Check Valve

Fabri-Valve F10 Swing Check Valve

Product Description

The Fabri-Valve F10 is a swing check valve that can be installed in any orientation. Snubbers (dash pots) are available to control the rate of closing in unusual orientations. When ordered with counterweights, the counterweight hub will normally be furnished unkeyed. If orientation of the valve is specified on the order, the hub will be keyed at the factory. Fabricated construction allows a choice of standard and special materials.

Download Literature

Specifications

Size Range
3” – 48”
Pressure Rating
150 psi (10.3 bar) CWP to 24”
50 psi (3.5 bar) CWP 30” – 48”
Temperature Rating
500°F (260°C), Consult factory for applications to 1500°F( 816°C)
NOTE: Service temperatures above 400°F (204°C) require high temperature fasteners. Specify service temperature on paperwork.
Flanges Drilling
ANSI 125/150 through hole is standard.
Contact factory for alternate flange drilling.