Products

GV Actuator (Pneumatic)

GV Actuator  (Pneumatic)

Product Description

The GV actuator is the new standard for cylinder actuators on all Fabri-Valve products. The GV actuator replaces the FA actuator, providing a number of benefits for the customer. The GV actuator standard materials of construction are lighter in weight than the FA actuator. This allows for up to a 50 percent weight reduction when compared to the FA actuator for sizes up to 12 inch bore. Light weighted actuators reduce the amount of external support required and allow for easier installation. In addition to the light weight components, the GV actuator incorporates design features that enhance performance and extend life.

Download Literature


Specifications

Size Range
2” – 36”
Temperature Ratings
Standard Construction:
Buna-N seals and aluminum tube (2.5-5 in. bores): -20ºF - 220ºF (-29ºC - 104ºC)
Buna-N seals and composite tube (6-24 in. bores): -20ºF - 220ºF (-29ºC - 104ºC)
Optional Construction:
Fluorocarbon and aluminum tube (2.5-5 in. bores): -15ºF - 400ºF (-26ºC - 204ºC)
Fluorocarbon and composite tube (6-24 in. bores): -15ºF - 325ºF (-26ºC - 163ºC)
Special Construction:
Buna-N seals and steel tube (all bore sizes): -20ºF - 220ºF (-29ºC - 104ºC)
Fluorocarbon and steel tube (all bore sizes): -15ºF - 400ºF (-26ºC - 204ºC)

Model Features

• Piston and piston seals with tight tolerances provide long life and resistance to piston gap extrusion.
• The piston wear strip supports the piston for increased seal life and reduced compression set.
• Ductile cast iron rod bearing promotes long life in high load applications.
• Tie rods, head cap, and rear cap are manufactured for corrosion resistance.
• The rod is ground and polished for optimum seal life.
• NPT ports are machined for optimum unrestricted air flow. Port location can be conveniently changed by rotating either head in 90 degree intervals

GV Actuator (Pneumatic)

GV Actuator  (Pneumatic)

Product Description

The GV actuator is the new standard for cylinder actuators on all Fabri-Valve products. The GV actuator replaces the FA actuator, providing a number of benefits for the customer. The GV actuator standard materials of construction are lighter in weight than the FA actuator. This allows for up to a 50 percent weight reduction when compared to the FA actuator for sizes up to 12 inch bore. Light weighted actuators reduce the amount of external support required and allow for easier installation. In addition to the light weight components, the GV actuator incorporates design features that enhance performance and extend life.

Download Literature

Specifications

Size Range
2” – 36”
Temperature Ratings
Standard Construction:
Buna-N seals and aluminum tube (2.5-5 in. bores): -20ºF - 220ºF (-29ºC - 104ºC)
Buna-N seals and composite tube (6-24 in. bores): -20ºF - 220ºF (-29ºC - 104ºC)
Optional Construction:
Fluorocarbon and aluminum tube (2.5-5 in. bores): -15ºF - 400ºF (-26ºC - 204ºC)
Fluorocarbon and composite tube (6-24 in. bores): -15ºF - 325ºF (-26ºC - 163ºC)
Special Construction:
Buna-N seals and steel tube (all bore sizes): -20ºF - 220ºF (-29ºC - 104ºC)
Fluorocarbon and steel tube (all bore sizes): -15ºF - 400ºF (-26ºC - 204ºC)

Model Features

• Piston and piston seals with tight tolerances provide long life and resistance to piston gap extrusion.
• The piston wear strip supports the piston for increased seal life and reduced compression set.
• Ductile cast iron rod bearing promotes long life in high load applications.
• Tie rods, head cap, and rear cap are manufactured for corrosion resistance.
• The rod is ground and polished for optimum seal life.
• NPT ports are machined for optimum unrestricted air flow. Port location can be conveniently changed by rotating either head in 90 degree intervals

SIL Certified

SIL 3 Capable International Certification
Learn More